Vektr A. Opel
- 1. Maintenance instruction
Key
Steering wheel
Seat belt
Rear-view mirrors
Seats
Ignition lock
Governing bodies and control devices
Control lamps of a combination of devices
Devices
Control lamps
Double information display
Board computer
Body elements
Safety
Lighting
Windows, hatch
Heating and ventilation
Conditioner
Automatic transmission
Instructions on driving
Filling
Catalyst
Control lamp of electronic system of the engine
Exhaust system, exhaust gases
Full drive
HARDWARE system (Traction Control)
Wheels and tires
Antisliding chains
Car identification
Parameters of engines
Running parameters
Bases of safe operation of the car
- Weekly checks and service in a way
If the engine is not started, even if the starter works normally
Start from an external source (other car)
Wheel replacement
Check of tightness of connections
Towage
+ Places of weekly checks
Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
If the engine is not started, even if the starter works normally
• Check availability of fuel in a tank.
• Check on humidity existence on electric components under a cowl. Switch off ignition, then wipe damp components a dry fabric. Put a water-repellent aerosol (WD-40 or an equivalent) on electric sockets. Pay special attention to the socket of electroconducting of the coil of ignition and a wire of a high voltage. Diesel engines usually have no such illness.
| Check that high-voltage wires are reliably connected to spark plugs. |
| Check that the electric socket of system of injection is reliably connected. |
| Check reliability of connection of the electric socket to the control unit ignition (at the switched-off ignition). |
| Check a condition and reliability of connection of plugs to the accumulator. |
| Check reliability of connection проводолв to the ignition coil (at the switched-off ignition). |
| Check electric sockets (at the switched-off ignition) and put on them a water-repellent aerosol, such as to WD-40. |