Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
- 14. Power shafts
   14.2. General information
   - 14.3. Power shaft
      14.3.1. Removal
      14.3.2. Installation
   14.4. Intermediate shaft
   14.5. Replacement of hinges of a power shaft
   14.6. Replacement of covers of hinges of equal angular speeds
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


d476fba5


14.3.1. Removal

Unscrewing of a nut of fastening of a power shaft to a nave

Arrangement шплинта fixings of a nut of fastening of the spherical hinge

Removal of a koronchaty nut of the spherical hinge

Stripper use for extraction of a pin of the spherical hinge from a rotary fist

Mount use with the direct end for extraction of the left power shaft from a transmission on models of 2,0 l

Extraction of the left power shaft from differential

Extraction of a power shaft from a nave

Distance measurement to a quencher of fluctuations

1–distance = 268,0 – 270,0 mm;

2–external hinge of equal angular speeds


PERFORMANCE ORDER
1. At existence remove from a wheel a cap, then weaken bolts of fastening of a forward wheel. Tighten the hand brake, lift a forward part of the car and fix on supports. Remove a forward wheel.
2. Take шплинт fixings of a nut of fastening of a power shaft to a nave.
3. Weaken a nut of fastening of a power shaft to a nave for what fix a nave from a provorachivaniye, having screwed in in it two bolts of fastening of a wheel and having inserted between bolts a steel core. Unscrew a nut and remove a washer from a power shaft (see fig. Unscrewing of a nut of fastening of a power shaft to a nave).
4. Take шплинт, then unscrew a koronchaty nut of fastening of a pin of the spherical hinge of the bottom lever to a rotary fist (see fig. Arrangement шплинта fixings of a nut of fastening of the spherical hinge, Removal of a koronchaty nut of the spherical hinge).
5. Using a stripper of spherical hinges, take a pin of the spherical hinge of the bottom lever from a rotary fist (see fig. Stripper use for extraction of a pin of the spherical hinge from a rotary fist).
6. For extraction of the internal hinge of a power shaft from a transmission it is necessary to use mount. For extraction of the right power shaft it is necessary to use mount with a slanted end face, and for extraction of the left shaft – with the rectangular end (see fig. Mount use with the direct end for extraction of the left power shaft from a transmission on models of 2,0 l).
7. Take a power shaft from a transmission. For this purpose insert between the internal CV JOINT and a transmission case mount and when the assistant will pull a wheel nave outside in strong sharp blow on the end of mount beat out a power shaft from gearing in a semi-axial gear wheel of differential. Using a soft wire, tie up the internal end of a power shaft to a car body (see fig. Extraction of the left power shaft from differential).
8. Together taken power shaft insert into a transmission plastic or wooden caps.
9. Take the external end of a power shaft from a nave. If the power shaft densely sits in a nave, temporarily screw a nut of a nave and, using a hammer, beat out a power shaft from a nave (see fig. Extraction of a power shaft from a nave).
10. By no means it is impossible to lower the car on wheels with removed by two or one power shafts as it will lead to damage of bearings of a wheel.
11. On some models the quencher of fluctuations on the right power shaft is established. If the quencher of fluctuations устанавли is howled on a new power shaft, it is necessary to establish it on the same place or according to fig. Distance measurement to a quencher of fluctuations.