Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
- 14. Power shafts
   14.2. General information
   - 14.3. Power shaft
      14.3.1. Removal
      14.3.2. Installation
   14.4. Intermediate shaft
   14.5. Replacement of hinges of a power shaft
   14.6. Replacement of covers of hinges of equal angular speeds
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


d476fba5


14.3.2. Installation

Installation site of a new lock ring on a power shaft

Tightening of a nut of fastening of a power shaft to a nave the demanded moment

Tightening of a nut of fastening of a power shaft to a nave, dovorachivy it on a demanded corner

PERFORMANCE ORDER
1. Before installation of a power shaft check a condition of a sealing ring of a power shaft in a transmission.
2. Remove a lock ring from the internal end of a power shaft and establish a new lock ring (see fig. An installation site of a new lock ring on a power shaft).
3. Clear shlitsa for a power shaft in a nave and a transmission. Grease with a thin layer of greasing working edges of a sealing ring, a shlitsa of a power shaft and flanges.
4. Combine internal shlitsa of a power shaft with shlitsa in a nave and insert a power shaft into a nave. Establish on a power shaft a new washer and by hand screw a nut of fastening of a power shaft to a nave.
5. Establish a power shaft in differential, having combined a shlitsa of a power shaft with flutes of semi-axial gear wheels of differential. Insert a power shaft into a transmission against the stop.
6. Insert a pin of the spherical hinge of the bottom lever into a rotary fist and fix a nut. Tighten a nut the demanded moment and fix from unscrewing the shplinty.
7. Tighten a nut of fastening of a power shaft to a nave the demanded moment and fix from unscrewing new the shplinty. If шплинт it is impossible to establish because of not coaxiality of an opening and grooves in a nut, tighten a nut on 9 °° (see fig. A tightening of a nut of fastening of a power shaft to a nave the demanded moment, the Tightening of a nut of fastening of a power shaft to a nave, dovorachivy it on a demanded corner).
8. Establish a wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the demanded moment. Establish a wheel cap.
9. Check oil level in a transmission and if necessary, finish it to norm.