Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
- 15. Brake system
   15.2. General information
   15.3. Anti-blocking system of brakes (ABS)
   15.4. Pumping of hydraulic brake system
   + 15.5. Replacement of forward brake shoes
   15.6. Replacement of back brake shoes on disk brakes
   + 15.7. Replacement of back brake shoes on drum-type brakes
   15.8. Replacement of brake shoes of the hand brake on back disk brakes
   15.9. Support of a forward brake
   15.10. Support of a back disk brake
   15.11. Brake disk
   15.12. Forward brake disk
   15.13. A back brake disk on models with SOHC engines
   15.14. A back brake disk on models with DOHC engines
   15.15. Brake drum
   15.16. Back working brake cylinder
   15.17. Brake board of a back brake
   15.18. Protective casing of a forward brake disk
   15.19. Main brake cylinder
   15.20. Repair of the main brake cylinder (model without ABS)
   15.21. Vacuum amplifier of brakes
   15.22. Hydraulic ABS modulator
   15.23. The ABS sensors established on wheels
   15.24. ABS control unit
   15.25. ABS relay (only ABS-2E system)
   15.26. Valves of adjustment of pressure
   15.27. Brake pipelines and hoses
   15.28. Adjustment of the hand brake
   + 15.29. Cable of the hand brake
   15.30. Lever of the hand brake
   15.31. Brake pedal
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions

15.18. Protective casing of a forward brake disk

Removal

Use of scissors for cutting of a crossing point of a protective casing of a forward brake disk

PERFORMANCE ORDER

1. At existence remove a cap of a forward wheel, then weaken bolts of fastening of a wheel. Tighten the hand brake, then lift a forward part of the car and fix on supports. Remove a wheel.

2. Remove a brake disk.

3. A screw-driver through an opening in a nave unscrew three screws, fixing a protective casing of a forward brake disk to a rotary fist.

4. Using scissors on metal, cut off the crossing point of a protective casing disturbing to its removal, and remove a protective casing (see drawing).

Installation

PERFORMANCE ORDER

1. At installation of a new protective casing of a forward brake disk cut out a crossing point in the same way, as well as at casing removal. Remove agnails from the cut-off edge and cover it антикоррозион with ny structure.

2. Further installation is made in sequence, return to removal taking into account the next moments.

3. Establish a brake disk.

4. Establish a wheel, then lower the car on the earth. Tighten bolts of fastening of a wheel the demanded moment.