Opel Vectra A
since 1988-1995 of release
Repair and car operation
Vektr A. Opel
+
1. Maintenance instruction
+
1.1 Maintenance
+
2. Engine
+
3. Repair of DOHC engines
+
4. Repair of the diesel engine
+
5. Cooling system
+
6. Fuel system
+
7. A fuel and exhaust system of models with system of injection of fuel
+
8. Exhaust system and system of fall of toxicity of exhaust gases
+
9. Fuel systems of the diesel engine
+
10. Engine electrosystems
+
11. Transmission
+
12. Mechanical transmission
+
13. Automatic transmission
+
14. Power shafts
+
15. Brake system
-
16. Suspension bracket
16.2. General information
16.3. Replacement of the bearing of a forward wheel
16.4. Forward bottom frame
16.5. Rack of a forward suspension bracket
16.6. Bottom lever of a forward suspension bracket
16.7. Replacement of plugs of the bottom lever of a forward suspension bracket
16.8. Spherical hinge of the bottom lever of a forward suspension bracket
16.9. Forward stabilizer of cross-section stability
16.10. Replacement of plugs of the forward stabilizer cross-section устойчи vost
16.11. Adjustment of the bearing of a back wheel (SOHC model)
16.12. Replacement of the bearing of a back wheel (the SOHC model till 1993)
16.13. Replacement of the bearing of a nave of a back wheel (model since 1993)
16.14. A nave of a back wheel (model with the SOHC engine)
16.15. Back shock-absorber
16.16. Replacement of rubber elements of fastening of the back shock-absorber
16.17. Springs of a back suspension bracket (SOHC model)
16.18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines)
16.19. Back stabilizer of cross-section stability
16.20. Replacement of the plug of the longitudinal lever of a back suspension bracket
16.21. A fixing element of a back nave (model with SOHC engines)
16.22. Check of system of a being self-leveled back suspension bracket
16.23. Control system elements being self-leveled a back suspension bracket
16.24. Replacement of the bearing of a back wheel (model with DOHC engines)
16.25. A nave of a back wheel (model with DOHC engines)
16.26. Knot of a back suspension bracket (model with DOHC engines)
16.27. The diagonal lever of a back suspension bracket (model with DOHC engines)
16.28. Back stabilizer of cross-section stability
16.29. Steering wheel
16.30. Centering of a steering wheel
16.31. Replacement of the elastic coupling of a shaft of steering transfer
16.32. Steering column
16.33. Repair of a steering column
16.34. Shock-absorber of steering transfer
+
16.35. Replacement of protective casings of steering transfer
16.36. Air removal from steering system with the amplifier
16.37. Pump of the amplifier of a steering
16.38. Popolnitelny tank of system of the amplifier of a steering
16.39. Pipes of cooling of liquid of the amplifier of a steering
16.40. Tips of steering draft
16.41. Steering draft
16.42. Corners of installation of forward wheels
+
17. Body
+
18. Electric equipment
+
19. Check of malfunctions
16.19. Back stabilizer of cross-section stability
(models with SOHC engines)
Removal
Arrangement of a bolt of fastening of the back stabilizer of cross-section stability to the longitudinal lever of a back suspension bracket
Arrangement of a clip of fastening of the back stabilizer of cross-section stability
PERFORMANCE ORDER
1.
Lift a back part of the car and fix on supports.
2.
Unscrew nuts and the bolts, the fixing ends of the stabilizer of cross-section stability to longitudinal levers of a back suspension bracket (see fig.
Arrangement of a bolt of fastening of the back stabilizer of cross-section stability to the longitudinal lever of a back suspension bracket
).
3.
Unscrew nuts and the bolts, fixing clips of the stabilizer of cross-section stability to a back torsionny beam and take the stabilizer from under the car (see fig.
Arrangement of a clip of fastening of the back stabilizer of cross-section stability
).
4.
Check a condition of plugs of fastening of the stabilizer and if necessary, replace them.
5.
For replacement of plugs simply pull together them since the stabilizer ends.
Installation
PERFORMANCE ORDER
1.
Installation is made in sequence, return to removal.
2.
Tighten all nuts and bolts the demanded moment.