Vektr A. Opel + 1. Maintenance instruction + 1.1 Maintenance + 2. Engine + 3. Repair of DOHC engines + 4. Repair of the diesel engine + 5. Cooling system + 6. Fuel system + 7. A fuel and exhaust system of models with system of injection of fuel + 8. Exhaust system and system of fall of toxicity of exhaust gases + 9. Fuel systems of the diesel engine + 10. Engine electrosystems + 11. Transmission + 12. Mechanical transmission + 13. Automatic transmission + 14. Power shafts + 15. Brake system - 16. Suspension bracket 16.2. General information 16.3. Replacement of the bearing of a forward wheel 16.4. Forward bottom frame 16.5. Rack of a forward suspension bracket 16.6. Bottom lever of a forward suspension bracket 16.7. Replacement of plugs of the bottom lever of a forward suspension bracket 16.8. Spherical hinge of the bottom lever of a forward suspension bracket 16.9. Forward stabilizer of cross-section stability 16.10. Replacement of plugs of the forward stabilizer cross-section устойчи vost 16.11. Adjustment of the bearing of a back wheel (SOHC model) 16.12. Replacement of the bearing of a back wheel (the SOHC model till 1993) 16.13. Replacement of the bearing of a nave of a back wheel (model since 1993) 16.14. A nave of a back wheel (model with the SOHC engine) 16.15. Back shock-absorber 16.16. Replacement of rubber elements of fastening of the back shock-absorber 16.17. Springs of a back suspension bracket (SOHC model) 16.18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines) 16.19. Back stabilizer of cross-section stability 16.20. Replacement of the plug of the longitudinal lever of a back suspension bracket 16.21. A fixing element of a back nave (model with SOHC engines) 16.22. Check of system of a being self-leveled back suspension bracket 16.23. Control system elements being self-leveled a back suspension bracket 16.24. Replacement of the bearing of a back wheel (model with DOHC engines) 16.25. A nave of a back wheel (model with DOHC engines) 16.26. Knot of a back suspension bracket (model with DOHC engines) 16.27. The diagonal lever of a back suspension bracket (model with DOHC engines) 16.28. Back stabilizer of cross-section stability 16.29. Steering wheel 16.30. Centering of a steering wheel 16.31. Replacement of the elastic coupling of a shaft of steering transfer 16.32. Steering column 16.33. Repair of a steering column 16.34. Shock-absorber of steering transfer + 16.35. Replacement of protective casings of steering transfer 16.36. Air removal from steering system with the amplifier 16.37. Pump of the amplifier of a steering 16.38. Popolnitelny tank of system of the amplifier of a steering 16.39. Pipes of cooling of liquid of the amplifier of a steering 16.40. Tips of steering draft 16.41. Steering draft 16.42. Corners of installation of forward wheels + 17. Body + 18. Electric equipment + 19. Check of malfunctions
|
Prevention
At connection трубопрово дов it is necessary to use new sealing rings.
MODELS OF 1,6 L (TILL 1992)
Removal
Arrangement of bolts of fastening of the pump of the amplifier of a steering on models of 1,6 l till 1992
PERFORMANCE ORDER |
1. Remove the case of the air filter located on the right side of a motor compartment. |
2. Remove a belt of a drive of the generator / on соса the amplifier of a steering. |
3. Unscrew three bolts and remove a pulley of the pump of the amplifier of a steering. |
4. Release and remove an external casing of a gear belt. |
5. Disconnect from the pump pipelines and close the ends of pipelines suitable jams. |
6. Unscrew two bolts and remove the pump from the block of cylinders, moving it towards the generator (see fig. An arrangement of bolts of fastening of the pump of the amplifier of a steering on models of 1,6 l till 1992). |
7. At a pump exit out of operation it is necessary to replace it, as repair of the pump is not provided. |
|
Installation
PERFORMANCE ORDER |
1. Installation is made in sequence, return to removal. At connection of pipelines use new sealing rings. Establish and adjust a tension of a belt of a drive of the generator/pump of the amplifier of a steering. |
2. Add liquid in system of a steering and remove air from hydraulic system. |
|
MODELS 1,6 (SINCE 1993), 1,8 AND 2,0 L
Removal
Hydraulic connections of the pump of the amplifier of a steering on models of 2,0 l
|
1–pipeline connection;
2–connection of a flexible hose |
PERFORMANCE ORDER |
1. Remove a belt of a drive of the pump of the amplifier of a steering. |
2. Disconnect from the pump the pipeline and a flexible hose and close their ends jams (see fig. Hydraulic connections of the pump of the amplifier of a steering on models of 2,0 l). |
3. Unscrew four bolts and remove the pump of the amplifier of a steering from the car. |
4. At a pump exit out of operation it is necessary to replace it, as repair of the pump is not provided. |
|
Installation
Arrangement of bolts of fastening and bolts which is necessary for weakening at adjustment of a tension of a driving belt on l models 1,8 and 2,0 till 1992
|
The moments of a tightening of bolts And, In and With are given in technical characteristics. |
Arrangement of bolts of fastening of the pump of the amplifier of a steering on models with DOHC engines
|
1–a bolt of fastening of the pump to an arm;
2–a bolt of fastening of the pump to an arm;
3–a bolt of fastening of a bracket to the pump;
4–a bolt of fastening of a bracket to the engine
|
|
|