Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   - 17.37. Panels of furnish of the dashboard
      17.37.2. The bottom panel of furnish from the driver
      17.37.3. Casings of a steering column
      17.37.4. Bottom panel of furnish of a combination of devices
      17.37.5. Top panel of furnish of a combination of devices
      17.37.6. Block of switching of lighting
      17.37.7. Radio receiver pocket
      17.37.8. Ware box
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions


d476fba5


17.37.3. Casings of a steering column

Removal

Removal of the lever of a regulator of a tilt angle of a steering column

Removal of a cap from the screw of fastening of a casing of a steering column

Vyvinchivaniye of forward screws of fastening of a casing of a steering column

Unscrewing of three screws of fastening of a casing of a steering column

Removal of the bottom casing of a steering column

Removal of the top casing of a steering column

PERFORMANCE ORDER
1. On models with adjustment of a tilt angle of a steering column establish a steering column in the top situation and unscrew the regulator lever (see fig. Removal of the lever of a regulator of a tilt angle of a steering column).
2. Consistently turn a steering wheel for access to screws of fastening of a casing of a steering column which are closed by plastic caps.
3. Remove a cap and unscrew the screw of fastening of a casing of a steering column, then turn a steering wheel, remove the second cap and unscrew the second screw of fastening (see fig. Removal of a cap from the screw of fastening of a casing of a steering column, Vyvinchivaniye of forward screws of fastening of a casing of a steering column).
4. Unscrew three screws of fastening located from the bottom party of a casing of a steering column, then remove the bottom and top casings (see fig. Unscrewing of three screws of fastening of a casing of a steering column, Removal of the bottom casing of a steering column, Removal of the top casing of a steering column).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal, but thus check that protective covers of switches were established in grooves in the top casing.