Opel Vectra A

since 1988-1995 of release

Repair and car operation



Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
   17.2. General information
   17.3. Security measures at carrying out welding works
   17.4. Care of a body
   17.5. Repair of insignificant damages of a body
   17.6. Repair of strong damages of a body
   17.7. Cowl
   17.8. Cowl lock
   17.9. Cable of the lock of a cowl
   17.10. Trunk lid (Sedan models)
   17.11. Lock of a trunk lid (Sedan model)
   17.12. Cylinder of the lock of a trunk lid (Sedan model)
   17.13. Back door (Hatchback models)
   17.14. Lock of a back door (Hatchback model)
   17.15. Cylinder of the lock of a back door (Hatchback model)
   17.16. Racks of a back door (Hatchback model)
   17.17. Doors
   17.18. Door upholstery
   17.19. Internal handle of opening of a door
   17.20. External handle of opening of a door
   17.21. Cylinder of the lock of a door
   17.22. Door lock
   17.23. Limiter of opening of a door
   17.24. Wind and back flew down
   17.25. Back triangular window leaves
   17.26. Door glass
   17.27. Window regulators
   17.28. External rear-view mirror
   17.29. Bumpers
   17.30. Front grille
   17.31. Windscreen deflector
   17.32. Loose leaves of an arch of a wheel
   17.33. Bottom protective plate (mudguard) of the engine
   17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
   + 17.35. Hatch elements
   17.36. Interior furnish
   - 17.37. Panels of furnish of the dashboard
      17.37.2. The bottom panel of furnish from the driver
      17.37.3. Casings of a steering column
      17.37.4. Bottom panel of furnish of a combination of devices
      17.37.5. Top panel of furnish of a combination of devices
      17.37.6. Block of switching of lighting
      17.37.7. Radio receiver pocket
      17.37.8. Ware box
   17.38. Central console
   17.39. Ceiling
   17.40. Sitting (without mechanisms of a tension of seat belts)
   17.41. Seat belts
   17.42. Mechanism of a tension of a seat belt
   17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions


d476fba5


17.37.7. Radio receiver pocket

Removal

Arrangement of the right adjusting pin behind the control panel a heater

Removal of the panel of furnish of a radio receiver

Removal of a pocket of a radio receiver from the dashboard

Detachment from a pocket of a radio receiver of the electric socket and the antenna tip

PERFORMANCE ORDER
1. Remove a radio receiver.
2. Remove the bottom and top panels of furnish of a combination of devices.
3. Unscrew the fastening screw from the bottom right side of the control panel a heater.
4. Remove from the dashboard hours or the board computer.
5. Through an aperture for hours or the board computer unscrew two screws of fastening of the control panel a heater.
Being careful, move the control panel a heater forward within length of wires and take it from the dashboard, thus do not stretch a cable of management of a heater. Adjusting pins of the panel of furnish of a radio receiver are behind adjusting pins of the control panel a heater (see fig. An arrangement of the right adjusting pin behind the control panel a heater, Removal of the panel of furnish of a radio receiver).
At existence unscrew two screws and, having pulled forward, take a radio receiver pocket, then disconnect from it the electric socket and the aerial tip (see fig. Removal of a pocket of a radio receiver from the dashboard, the Detachment from a pocket of a radio receiver of the electric socket and the antenna tip).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.