Opel Vectra A
since 1988-1995 of release
Repair and car operation
Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
- 17. Body
17.2. General information
17.3. Security measures at carrying out welding works
17.4. Care of a body
17.5. Repair of insignificant damages of a body
17.6. Repair of strong damages of a body
17.8. Cowl lock
17.9. Cable of the lock of a cowl
17.10. Trunk lid (Sedan models)
17.11. Lock of a trunk lid (Sedan model)
17.12. Cylinder of the lock of a trunk lid (Sedan model)
17.13. Back door (Hatchback models)
17.14. Lock of a back door (Hatchback model)
17.15. Cylinder of the lock of a back door (Hatchback model)
17.16. Racks of a back door (Hatchback model)
17.18. Door upholstery
17.19. Internal handle of opening of a door
17.20. External handle of opening of a door
17.21. Cylinder of the lock of a door
17.22. Door lock
17.23. Limiter of opening of a door
17.24. Wind and back flew down
17.25. Back triangular window leaves
17.26. Door glass
17.27. Window regulators
17.28. External rear-view mirror
17.30. Front grille
17.31. Windscreen deflector
17.32. Loose leaves of an arch of a wheel
17.33. Bottom protective plate (mudguard) of the engine
17.34. Folding shutter of a toplivozalivny mouth of a fuel tank
+ 17.35. Hatch elements
17.36. Interior furnish
+ 17.37. Panels of furnish of the dashboard
17.38. Central console
17.40. Sitting (without mechanisms of a tension of seat belts)
17.41. Seat belts
17.42. Mechanism of a tension of a seat belt
17.43. Forward sitting with the mechanism of a tension of a seat belt
+ 18. Electric equipment
+ 19. Check of malfunctions
Check of a condition of a body should be made regularly. Otherwise corrosion of separate sites of a body can lead to its strong damage and further expensive repair. It is also important to pay attention to parts of the car inaccessible to an external look, for example, to the bottom, arches of wheels and the lower part of a motor compartment, and also to the parts of a body hidden under an upholstery. A basic element at care of a body is its sink. Before a wash of the car soak insects and remove from a body surface. Plentifully use water. Use a soft sponge or a soft brush. It is impossible to wash a varnish covering with a stream with a strong pressure. Pour over the car from a hose and dirt wash away from top to down. Often rinse a sponge. Wipe the car pure rags. Apply only good fat-free washing substances. For the purpose of protection in water for a sink add washing preservatives. It is forbidden to wash and dry the car on the sun, otherwise on a varnish surface there are spots. Salt with which strew roads, has harmful effects on a car body.
Purely washed up and dried-up varnish covering is necessary for processing every 3 month preserving means to protect a car surface from atmospheric influences by creation of a besporisty water-repellent wax layer.
The flowed-out fuel, oil or greasing, and also brake liquid at once to remove, color of a varnish covering differently will change.
Processing of a surface is necessary for repeating, if water does not gather to drops, and spreads on a surface. Regular processing by preserving means promotes long preservation of shine of a varnish covering.
There is also other possibility of protection of varnish coverings - by means of washing preservatives. However washing консерван you provide reliable protection of varnish coverings only in case are used at each wash of the car and not less than in 2-3 weeks.
After use of washing (foam) means additional processing of a surface by preservatives especially is recommended.
Polishing of a varnish surface is necessary only in case it faded owing to insufficient leaving, influence of the dust, harmful gases, weather conditions, and preserving means cannot restore its shine.
It is not necessary to apply rough полировоч ny pastes and chemically active polishing means, despite a predvaritel but good results.
Before polishing the car is necessary for washing up and carefully to dry up. Further to adhere to the instruction on use of polishing means.
Polishing to make small sites in order to avoid premature drying of polish. After surface processing by some polishing means it is necessary to make additional preservation. It is forbidden to polish on the open sun. Opaque varnish surfaces cannot be processed preserving and polishing means.
Removal of spots of pitch
Pitch quickly диффундирует in varnish coverings and to remove it completely already it is impossible. It is possible to remove fresh spots of pitch with the soft rag moistened in flushing gasoline. In case of emergency it is possible to use usual gasoline, kerosene or turpentine.
Removal of insects
Insects contain substances which can damage a varnish film if them quickly not to remove. Insects can be washed away only weak slightly warm soap or washing solution or by means of special means for removal of insects.
Removal of construction solutions
Splashes of construction materials are washed away by slightly warm solution of neutral detergents. Strongly not to rub, differently it is possible to scratch a varnish covering. Then carefully to rinse with pure water.
Care of details from искусствен ny materials
Plastic details, sitting from an imitation leather, a headlight, and also the details painted in opaque by black color, it is possible to wash with water with addition of special detergents. It is not recommended to wet. Plastic details can be processed if necessary special cleaners. Not to use at all nitrosolvent or gasoline.
Sink of glasses
Glasses to wipe a pure soft rag from the internal and outer side. At strong pollution it is possible to use alcohol or liquid ammonia and warm water, and also special means for purification of glasses. At a windscreen sink screen wipers to lift up.
Care of rubber consolidations
Condensing or sliding surfaces periodically to strew with talc or to spray silicone аэрозолью. It will keep their elasticity and will exclude a scratch when closing doors. To eliminate unpleasant sounds it is possible, having wiped adjoining surfaces liquid soap.
Disks of wheels
Disks of wheels from light metals demand leaving, especially in a cold season. For this purpose it is possible to use special means for cleaning of disks. Not to apply active, kislotosoderzhashchy, silnoshchelochny and rough cleaners or water with temperature from above + 60°С.
It is necessary to wash seat belts with weak alkaline solution, without removing them. Not to subject them to dry cleaning which can cause destruction of fibers. Belts with automatic winding to braid in the dried-up condition, if necessary to use special an aerosol for the best sliding. It is not recommended to dry belts at temperature over 80 ° With and on the open sun.
Coverings from a fabric
Soft seats to clean the vacuum cleaner or a rigid brush. Strongly polluted sitting to clear dry foam. Fat and oil spots to process pure gasoline or spot remover. The cleaner cannot be poured directly on a fabric. The spot is deduced by its wipe on a contour from spot edge to the center. It is possible to remove other pollution, using slightly warm soap water.