Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
- 3. Repair of DOHC engines
   3.2. General information
   3.3. Removal and engine installation
   3.4. Replacement of support of the power unit
   + 3.5. Gear belt, pulleys, pulley of the mechanism of a tension and intermediate pulley
   3.6. A gear belt with the automatic mechanism of a tension
   3.7. Forward sealing ring of a camshaft
   3.8. Camshafts
   3.9. Installation of a head of the block of cylinders on the engine established in the car
   3.10. Installation of a head of the block of cylinders on the engine which has been removed from the car
   3.11. Repair of a head of the block of cylinders
   3.12. Hydraulic pushers of valves
   3.13. Replacement of a forward sealing ring of a cranked shaft
   3.14. Oil pallet
   3.15. Oil pump
   3.16. Oil radiator
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions

3.3. Removal and engine installation

Removal

PERFORMANCE ORDER

1. Removal of the engine is made in the same way, as well as DOHC engine removal taking into account the next moments.

2. After a raising of the car remove an engine mudguard.

3. Disconnect fuel hoses from the fuel highway.

4. Disconnect hoses of supply of cooling liquid from the block of cylinders and a head of the block of cylinders. Disconnect connecting couplings of the pipeline of an oil radiator from the oil pump.

5. Unscrew the right support of the central bearing of a power shaft from a back part of the block of cylinders.

Installation

PERFORMANCE ORDER

1. Installation of the DOHC engine is similar to SOHC engine installation except for the next moments. Replace the right support of the central bearing of a power shaft in a back part of the block of cylinders and screw bolts, having tightened them the demanded moment.

2. Replace an engine mudguard.