Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
- 4. Repair of the diesel engine
4.2. General information
4.3. The repair which is not demanding removal of the engine
4.4. Compression check
4.5. Top dead point (VMT) of the piston of the first cylinder
4.6. Cover of a head of the block of cylinders
4.7. Pulley of a cranked shaft
4.8. Casings of a gear belt
4.9. Replacement of a gear belt
4.10. Check and installation of phases of a gazoraspredeleniye
+ 4.11. Mechanism of a tension of a gear belt and pulleys
4.12. Replacement of a sealing ring of a camshaft
4.13. Check and adjustment of gaps of valves
4.14. Camshaft and pushers
4.15. Head of the block of cylinders
4.16. Oil pallet
4.17. Oil pump
4.18. Replacement of a sealing ring of the oil pump
4.19. Oil radiator
+ 4.20. Pistons with rods
4.21. Flywheel
4.22. Replacement of sealing rings of a cranked shaft
4.23. Replacement of support of the power unit
4.24. Recommendations about engine removal
4.25. Removal and engine installation
4.26. Engine repair
4.27. Engine start after major maintenance
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
4.24. Recommendations about engine removal
| GENERAL INFORMATION |
Prevention
On all models the power unit consisting of the engine and a transmission, acts in film up from a motor compartment.
If you decided to remove the engine for repair, some preparations should be made.
The paramount importance has a choice of a venue of works, for providing space for service and storage of spare parts. It is desirable to do it at autostation or in garage with an equal horizontal floor with a pure firm covering.
Before removal of the engine wash up the engine and a motor compartment. Removal of the engine needs the load-lifting mechanism allowing safely to lift the power unit.
If you remove the engine for the first time, it is necessary to invite the skilled expert. Besides, there are many cases when one person cannot execute at the same time all actions at engine removal.