Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
- 9. Fuel systems of the diesel engine
9.2. General information
9.3. Case of the air filter
9.4. Accelerator pedal
9.5. Fuel level sensor
9.6. Fuel tank
9.7. Heater of the fuel filter
9.8. Water plums from the fuel filter
9.9. Filling and pumping of fuel system
9.10. Check and adjustment of the maximum turns
9.11. Check and adjustment of turns of idling
9.12. Electromagnetic valve of a stop of the engine
9.13. Fuel pump of a high pressure
9.14. Check and adjustment of the moment of injection of fuel
9.15. Fuel nozzles
9.16. Turbonagnetatel
9.17. Heat exchanger
9.18. Inlet collector
9.19. Final collector
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
9.9. Filling and pumping of fuel system
| GENERAL INFORMATION |
Prevention
After any separation of fuel system air which it is necessary to remove can get to it. In case of complete production of fuel from a fuel tank it is not obligatory to fill in completely a fuel tank and to pump over fuel system. It is enough to add fuel in a fuel tank and to start the engine a starter at completely pressed pedal of an accelerator. After engine start slightly increase idling turns for the completion of process of pumping of fuel system.
If the engine is not started because of formation of air jams unscrew a connecting nut of fastening of the pipeline to a fuel nozzle and include a starter so that fuel started to follow from connection.