Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
- 16. Suspension bracket
16.2. General information
16.3. Replacement of the bearing of a forward wheel
16.4. Forward bottom frame
16.5. Rack of a forward suspension bracket
16.6. Bottom lever of a forward suspension bracket
16.7. Replacement of plugs of the bottom lever of a forward suspension bracket
16.8. Spherical hinge of the bottom lever of a forward suspension bracket
16.9. Forward stabilizer of cross-section stability
16.10. Replacement of plugs of the forward stabilizer cross-section устойчи vost
16.11. Adjustment of the bearing of a back wheel (SOHC model)
16.12. Replacement of the bearing of a back wheel (the SOHC model till 1993)
16.13. Replacement of the bearing of a nave of a back wheel (model since 1993)
16.14. A nave of a back wheel (model with the SOHC engine)
16.15. Back shock-absorber
16.16. Replacement of rubber elements of fastening of the back shock-absorber
16.17. Springs of a back suspension bracket (SOHC model)
16.18. Knot of longitudinal levers of a back suspension bracket (model with SOHC engines)
16.19. Back stabilizer of cross-section stability
16.20. Replacement of the plug of the longitudinal lever of a back suspension bracket
16.21. A fixing element of a back nave (model with SOHC engines)
16.22. Check of system of a being self-leveled back suspension bracket
16.23. Control system elements being self-leveled a back suspension bracket
16.24. Replacement of the bearing of a back wheel (model with DOHC engines)
16.25. A nave of a back wheel (model with DOHC engines)
16.26. Knot of a back suspension bracket (model with DOHC engines)
16.27. The diagonal lever of a back suspension bracket (model with DOHC engines)
16.28. Back stabilizer of cross-section stability
16.29. Steering wheel
16.30. Centering of a steering wheel
16.31. Replacement of the elastic coupling of a shaft of steering transfer
16.32. Steering column
16.33. Repair of a steering column
16.34. Shock-absorber of steering transfer
+ 16.35. Replacement of protective casings of steering transfer
16.36. Air removal from steering system with the amplifier
16.37. Pump of the amplifier of a steering
16.38. Popolnitelny tank of system of the amplifier of a steering
16.39. Pipes of cooling of liquid of the amplifier of a steering
16.40. Tips of steering draft
16.41. Steering draft
16.42. Corners of installation of forward wheels
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions
SUSPENSION BRACKET
16. Suspension bracket and steering
16.1. Technical characteristics
General information|
Type of a forward suspension bracket (all models)
|
Independent suspension bracket with racks of MacPherson and the stabilizer of cross-section stability
|
Type of a back suspension bracket
|
Models with SOHC engines
|
Dependent, with a back torsionny beam, longitudinal levers, barrel-like springs and telescopic shock-absorbers. On some models the stabilizer of cross-section stability is established. On some models the system of adjustment of rigidity of a back suspension bracket is established
|
|
Models with DOHC engines
| Independent, with diagonal levers, cylindrical springs, telescopic shock-absorbers and the stabilizer of cross-section stability |
|
Steering type (all models)
| Reechny steering transfer. On some models the amplifier of a steering is established |
|
Adjusting loading of the car (all models)
| 70 kg on each forward sitting and half filled fuel tank |
|
Corners of installation of a forward suspension bracket (adjusting loading):
| |
|
Disorder corner
|
- 40 '± 40'
|
|
Longitudinal tilt angle rotary шкворня
|
+ 2 ° ± 1 °
|
|
Convergence
|
+ 15 '± 10'
|
|
The maximum distinction between the parties
|
1°30 '± 45'
|
|
Corners of installation of a back suspension bracket (adjusting loading, after pressing several times on a back part of the car):
| |
|
– models with DOHC engines:
| |
|
• disorder corner
|
- 2°10 '± 40'
|
|
• convergence
|
+ 25' + 30 '/-20'
|
|
– models with SOHC engines:
| |
|
• disorder corner
|
- 1°40 '± 30'
|
|
• convergence
|
+ 10' + 30 '/-20'
|
Steering
|
Transfer number:
| |
|
– without the amplifier of a steering
|
22: 1 or 24,5: 1
|
|
– with the amplifier of a steering
|
18: 1
|
|
Tension of a belt of a drive of the pump of the amplifier of a steering (measurement with the Vauxhall tool):
| |
|
– new belt
|
250-300 N
|
|
– belt which was in use
|
450 N
|
Wheels and tires
|
Size of a wheel:
| |
|
– all models
|
5 1/2 J x 13, 5 1/2 J x 14 or 6 J x 15
|
|
Size of tires:
| |
|
– wheels of 5 1/2 J x 13
|
165 R13-82T
|
|
– wheels of 5 1/2 J x 14
|
175/70 R14-82T, 195/60 R14-85Hs or 195/60 R14-85V
|
|
– wheels of 6 J x 15
|
195/60 R15-87V or 205/55 R15-87V
|
Tightening moments
|
Forward suspension bracket - all models
| |
|
Stabilizer of cross-section stability to the bottom forward frame
|
20 Nanometers
|
|
The spherical hinge to the bottom lever
|
60 Nanometers
|
|
The spherical hinge of the bottom lever to a rack of a forward suspension bracket
|
70 Nanometers
|
|
Forward fastening of the bottom lever to the bottom frame (horizontal) *:
| |
|
– stage 1
|
100 Nanometers
|
|
– stage 2
|
To tighten on a corner 60-75 °
|
|
Quencher of fluctuations of the bottom lever
|
20 Nanometers
|
|
Bolts of fastening of the bottom forward frame to a car body *:
| |
|
– lobbies
|
115 Nanometers
|
|
– the central
|
170 Nanometers
|
|
– the back:
| |
|
• stage 1
|
100 Nanometers
|
|
• stage 2
|
To tighten on a corner 75-90 °
|
|
Top fastening of a rack of a forward suspension bracket
|
55 Nanometers
|
|
Fastening of a rod of the shock-absorber of a rack of a forward suspension bracket
|
55 Nanometers
|
|
Ring nut fastening of the shock-absorber of a rack of a forward suspension bracket
|
200 Nanometers
|
|
Back suspension bracket - models with SOHC engines (with one camshaft of the top arrangement)
| |
|
Stabilizer of cross-section stability
|
30 Nanometers
|
|
Fixing element of a nave of a back wheel (unattended type):
| |
|
– stage 1
|
50 Nanometers
|
|
– stage 2
|
To tighten on a corner 35-45 °
|
|
Nut of fastening of a nave of a back wheel
|
25 Nanometers
|
|
Bottom fastening of the shock-absorber
|
70 Nanometers
|
|
Top fastening of the shock-absorber
|
20 Nanometers
|
|
Fixing element of a nave to the longitudinal lever of a suspension bracket *:
| |
|
– stage 1
|
50 Nanometers
|
|
– stage 2
|
To tighten on a corner 35-45 °
|
|
The longitudinal lever of a suspension bracket to a body
|
105 Nanometers
|
|
Back suspension bracket - models with DOHC engines (with two camshafts of the top arrangement)
| |
|
Stabilizer of cross-section stability
|
22 Nanometers
|
|
Arm of fastening of a back cross-section beam to a body
|
65 Nanometers
|
|
Fastening of a back cross-section beam to a body
|
60 Nanometers
|
|
Forward cross-section beam to a body
|
125 Nanometers
|
|
Nave of a back wheel *
|
300 Nanometers
|
|
The diagonal lever to a forward cross-section beam
|
100 Nanometers
|
|
Bottom fastening of the shock-absorber
|
110 Nanometers
|
|
Top fastening of the shock-absorber
|
20 Nanometers
|
|
Steering
| |
|
Fastening of steering transfer to a partition of a motor compartment
|
22 Nanometers
|
|
Nut of fastening of a steering wheel
|
25 Nanometers
|
|
Steering bent for to steering transfer
|
95 Nanometers
|
|
Clip of a tip of steering draft
|
20 Nanometers
|
|
Tip of steering bent for to the spherical hinge of a forward rack
|
60 Nanometers
|
|
The elastic coupling to a steering shaft
|
22 Nanometers
|
|
Gear wheel of steering transfer
|
40 Nanometers
|
|
Shock-absorber helmsman of transfers
|
60 Nanometers
|
| The connecting couplings connecting tubes of the amplifier of a steering to steering transfer |
42 Nanometers
|
| The connecting couplings connecting tubes of the amplifier of a steering to the pump |
28 Nanometers
|
|
The connecting couplings connecting tubes of the amplifier steering among themselves |
28 Nanometers
|
|
Fastening of the pump of the amplifier of a steering:
| |
|
– models of 1,6 l till 1992
|
30 Nanometers
|
|
– l models 1,8 and 2,0 till 1992:
| |
|
• bolts of "A" and "C" (see the text)
|
25 Nanometers
|
|
• "B" bolts (see the text)
|
40 Nanometers
|
|
– models with the SOHC engine since 1993
|
20 Nanometers
|
|
– models with the DOHC engine since 1993
| |
|
• bolts "1" and "2" (see the text)
|
25 Nanometers
|
|
• bolts "3" and "4" (see the text)
|
18 Nanometers
|
|
Pulley of the pump of the amplifier of a steering on models of 1,6 l
|
25 Nanometers
|
|
Steering column to a dashboard arm
|
22 Nanometers
|
|
Right top fastening of a steering column
|
22 Nanometers
|
* It is necessary to use only new nuts, bolts or шплинты.