The accumulator holds a charging short time
• The malfunction of the accumulator connected with an osypaniye of plates. • Are unreliably fixed or коррозированы accumulator plugs. • Wear or wrong adjustment of a tension of an auxiliary driving belt. • The current developed by the generator, is insufficient for a full battery charging. • The generator or a tension regulator is faulty. • Short circuit in an electric chain of the car, causing a constant discharge of the accumulator.
Constantly the control lamp of a battery charging burns
• Damage or wrong adjustment of a tension of an auxiliary driving belt. • Generator brushes are polluted, jammed or worn-out. • Damage of springs of brushes of the generator. • The generator or a tension regulator is faulty. • Damage of electroconducting to a charging chain.
The control lamp of a battery charging does not burn
• The control lamp fused. • Break in an electric chain of a control lamp. • The generator or a tension regulator is faulty.
Bulbs do not burn
• The filament lamp fused. • Fused a safety lock. • The switch is faulty. • Break in an electric chain of a bulb. • The relay is faulty. • Contacts in the electric socket are oxidized.
Inexact indications of devices
Indications of devices increase with increase in turns of the engine
• The tension regulator is faulty.
The index of fuel or temperature does not give indications
• Break of an electric chain. • The sensor is faulty. • The index is faulty.
The index of fuel or temperature shows the maximum value
• Short circuit of an electric chain. • The sensor is faulty. • The index is faulty.
Violations of work of a sound signal
The sound signal moves constantly
• Zakorachivaniye of the button of a sound signal on weight or its jamming in the pressed situation. • The wire of a sound signal is connected to weight.
The sound signal does not work
• Fused the fuse. • Break of a wire of a sound signal. • The sound signal is faulty.
The sound signal works falteringly
• Connections of a wire of a sound signal are weakened or oxidized. • Fastening of a sound signal is weakened. • The sound signal is faulty.
Violations of work of screen wipers
Screen wipers do not work or work very slowly
• Brushes of a screen wiper were fixed on a windscreen or jammed draft of a screen wiper. • Fused the fuse. • Are weakened or коррозированы contacts in the electric socket of a screen wiper. • The screen wiper relay is faulty. • The screen wiper engine is faulty.
Screen wiper brushes not completely clear glass
• The screen wiper lever is incorrectly established. • Strong wear of draft of a screen wiper. • Fastening of the engine of a screen wiper or draft of a screen wiper is weakened.
Low efficiency of cleaning flew down
• The rubber element of a brush of a screen wiper is worn-out or damaged. • Springs of the lever of a screen wiper are weakened or damaged or lever hinges are jammed. • Small concentration of detergent in liquid of a washer of glass.
Unsatisfactory work of stekloomyvatel
Jets of a stekloomyvatel do not work.
• Jets of a stekloomyvatel are hammered. • It was disconnected, the hose of supply of liquid to a washer is pressed or littered. • There is no liquid in a tank of a stekloomyvatel.
The pump of a stekloomyvatel does not work.
• Connections of contacts in the electric socket of the pump of a washer are weakened. • Fused the fuse. • The switch of a stekloomyvatel is faulty. • The pump of a stekloomyvatel is faulty.
Supply of liquid on glass occurs after a while after washer inclusion
• The unilateral valve located in a hose of supply of liquid to jets of a washer is faulty.
Unsatisfactory work of electric window regulators
Glass moves only in one direction
• The switch is faulty.
Glass moves very slowly
• The window regulator is damaged. • Internal elements of a door interfere with window regulator work. • The window regulator engine is faulty.
Glass does not move
• Fused the fuse. • The window regulator relay is faulty. • Weakening of contacts in the electric socket of a window regulator. • The window regulator engine is faulty.
Unsatisfactory operation of the central lock
The central lock does not work
• Fused the fuse. • The relay of the central lock is faulty. • Contacts in the electric socket of the central lock are weakened. • The control unit or the engine is faulty.
The latch of the lock moves, but the lock does not open or is not closed
• The switch is faulty. • Drafts or the latch lever are damaged or disconnected. • The relay is faulty. • The control unit or the electric motor is faulty. One of executive mechanisms does not work. • Contacts in the electric socket of the central lock are weakened. • The executive mechanism is faulty. • Drafts or latch levers are damaged or disconnected. • Latch damage. |