Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
- 1. Maintenance instruction
   Steering wheel
   Seat belt
   Rear-view mirrors
   Ignition lock
   Governing bodies and control devices
   Control lamps of a combination of devices
   Control lamps
   Double information display
   Board computer
   Body elements
   Windows, hatch
   Heating and ventilation
   Automatic transmission
   Instructions on driving
   Control lamp of electronic system of the engine
   Exhaust system, exhaust gases
   Full drive
   HARDWARE system (Traction Control)
   Wheels and tires
   Antisliding chains
   Car identification
   Parameters of engines
   Running parameters
   Bases of safe operation of the car
   + Weekly checks and service in a way
   Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


Board computer


The Orel board computer informs on parameters of driving which it periodically registers and an electronic way estimates.

By button pressing on the display are highlighted:

Momentanverbrauch (the current fuel consumption)
Durchschnittsverbrauch (average fuel consumption)
Durchschnittsgeschwindigkeit (average speed)
Reichweite (course stock)
Stoppuhr (stop watch)
Aussentemperatur (external temperature)
Time (continuous indication)


At the switched-off ignition - time;

at the included ignition - time,

by consecutive pressing of the step-by-step button:

the chosen field of parameters;

"F" on the display testifies to malfunction: for elimination of the reason address in masterful Orel.

Step-by-step button (ahead)

Press before emergence of indication of a desirable field of parameters.

Step-by-step button (behind)

At indication of fields of parameters

- Durchschnittsverbrauch (average fuel consumption)

- Durchschnittsgeschwindigkeit (average speed)

by pressing the starting button (at least 2 seconds) both fields are started at the same time.

The data written down before in memory will be automatically erased - one-times but there will be a stop watch installation on zero.

Not erased data:

time, current fuel consumption, stock of a course and external temperature.

Time is not established

At the termination of a food or tension of the accumulator is lower 7 In all data will be erased.

At tension is lower than this value and engine start by means of an auxiliary cable the board computer after a battery charging at the switched-off engine by an accumulator detachment (at least 2 minutes) is necessary for activating again.

Time installation
At the left: button of hours

On the right: button of minutes

Installation with second accuracy, for example, by means of a ball pen: indication of hours and minutes one for another adjust for established time, at emergence of time press a step-by-step or starting key.

24-hour indication

(12-hour indication)


(current fuel consumption)

Indication changes depending on speed.

Indication in l/h is lower than 13 km/h

(Indication in гал / is lower than 8 miles/h) h

Indication in km l/100 over 13 km/h

(Indication in m / гал over 8 miles/h)

Indication of 0 l/100 of km at draft switching off

(Indication of 999.9 m / гал at draft switching off)


(average fuel consumption)

Calculation of average fuel consumption it is possible at any time for example, after filling - start over again in key R pressing.

Indication in km l/100

(Indication in m / гал)


(average speed)

Calculation of average speed can be begun again at any time - for example, after a start of motion - button R pressing.

Breaks in movement with ignition switching off at calculation are not considered.

Indication in km/h

(indication in miles/h)

Reichweite unter of 50 km

(course stock over 50 km)

The stock of a course pays off, proceeding from the current fullness of a tank and average consumption of fuel for the last 20-30 km of a way.

After filling the new stock of a course can be calculated by pressing a key R, or this size automatically перерасчитывается through approximately each 10 km.

Indication in km

(indication in miles)


(stop watch)

By button R pressing

zero - start - stop - zero...

Commissioning of a stop watch does not influence functional fields

– average consumption of fuel
– average speed.

Measurement time
The shown figures
to 10 mines
1/10 seconds
to 60 mines
to the 100th hour
from above 100th hour


(external temperature)

Current indication. At temperature drop indication reacts immediately, at increase - with a delay.

Carefully: at indication some degrees above 0 °C (32 °F) the road can already be ice-covered.

At temperature below 3 °C indication without involvement of the step-by-step button with a blinking is switched to "external temperature". By a call of other field of parameters this precautionary function is disconnected.

Indication in °C (Indication in °F)