Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
- 1. Maintenance instruction
   Steering wheel
   Seat belt
   Rear-view mirrors
   Ignition lock
   Governing bodies and control devices
   Control lamps of a combination of devices
   Control lamps
   Double information display
   Board computer
   Body elements
   Windows, hatch
   Heating and ventilation
   Automatic transmission
   Instructions on driving
   Control lamp of electronic system of the engine
   Exhaust system, exhaust gases
   Full drive
   HARDWARE system (Traction Control)
   Wheels and tires
   Antisliding chains
   Car identification
   Parameters of engines
   Running parameters
   Bases of safe operation of the car
   + Weekly checks and service in a way
   Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


Wheels and tires


For your safety and safety of other participants of movement it is necessary to adhere to below-mentioned rules strictly.

The type of the established tires corresponds to the running mechanism of the car. Before change of tires or disks with others it is necessary to address for consultation in a specialized workshop of Orel. Use of improper tires or disks can lead to failure.

To mount new tires in pairs, it is better a complete set. On one bridge to put tires:

– identical size;
– identical design;
– one manufacturer;
– identical profile

Condition of tires and disks

Arrival on sharp borders can lead to the hidden damages of tires and disks which prove only later, there is a danger of a rupture of tires.

Borders перезжайте on small speed and whenever possible at an angle.

Regularly check tires on absence of damages (the got stuck foreign matters, punctures, cuts, cracks, dents on lateral walls). The damaged tires can burst. Check integrity of disks. At detection of damages or unusual wear address in a specialized workshop of Orel.

Regularly supervise depth of a profile. If wear in front exceeds wear behind, trade places back and forward wheels. Wheels with the best profile should stand ahead.

For safety reasons at depth of a profile from 2 to 3 mm of the tire it is best of all to replace. Minimum admissible the profile (1,6 mm) is reached by rules, when the profile wears out to a certain index of a deterioration. Some indexes of a deterioration are from each other put on a profile of a running gear at identical distance. Their situation is shown also by marking on a lateral surface of tires.