Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
- 1. Maintenance instruction
   Steering wheel
   Seat belt
   Rear-view mirrors
   Ignition lock
   Governing bodies and control devices
   Control lamps of a combination of devices
   Control lamps
   Double information display
   Board computer
   Body elements
   Windows, hatch
   Heating and ventilation
   Automatic transmission
   Instructions on driving
   Control lamp of electronic system of the engine
   Exhaust system, exhaust gases
   Full drive
   HARDWARE system (Traction Control)
   Wheels and tires
   Antisliding chains
   Car identification
   Parameters of engines
   Running parameters
   Bases of safe operation of the car
   - Weekly checks and service in a way
      If the engine is not started, even if the starter works normally
      Start from an external source (other car)
      Wheel replacement
      Check of tightness of connections
      + Places of weekly checks
   Operational materials and liquids
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


If the engine is not started, even if the starter works normally

• Check availability of fuel in a tank.

• Check on humidity existence on electric components under a cowl. Switch off ignition, then wipe damp components a dry fabric. Put a water-repellent aerosol (WD-40 or an equivalent) on electric sockets. Pay special attention to the socket of electroconducting of the coil of ignition and a wire of a high voltage. Diesel engines usually have no such illness.

Check that high-voltage wires are reliably connected to spark plugs.

Check that the electric socket of system of injection is reliably connected.

Check reliability of connection of the electric socket to the control unit ignition (at the switched-off ignition).

Check a condition and reliability of connection of plugs to the accumulator.

Check reliability of connection проводолв to the ignition coil (at the switched-off ignition).

Check electric sockets (at the switched-off ignition) and put on them a water-repellent aerosol, such as to WD-40.