Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
- 5. Cooling system
   5.2. General information
   5.3. Antifreeze
   5.4. Washing of system of cooling
   5.5. Plums of cooling liquid
   5.6. Filling of system of cooling
   5.7. A radiator (models with a mechanical transmission)
   5.8. A radiator (models with an automatic transmission)
   5.9. Check and radiator cleaning
   5.10. Thermostat
   5.11. Check of operability of the thermostat
   5.12. Water pump
   5.13. Radiator fan
   5.14. A broad tank and the sensor of level of cooling liquid
   5.15. The sensor of the index of temperature of cooling liquid
   5.16. Temperature-sensitive element of the fan of a radiator
   5.17. Control panel heater
   5.18. Heater radiator
   5.19. Engine of the fan of a heater
   5.20. Ventilation nozzles
+ 6. Fuel system
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


5.13. Radiator fan


Removal of a casing of the fan of a radiator on models of 2,0 l of SOHC

1. Remove a weight wire from the accumulator.
2. Note an arrangement and disconnect the electric socket from the engine of the fan of a radiator.
3. Unscrew fastening bolts from two parties in the top part of a casing of the fan of a radiator, then reject a fan casing to the engine, move it up and remove from a radiator (see drawing).
4. Unscrew three nuts and remove the engine of the fan of a radiator from a casing. If necessary remove a spring bracket and remove a krylchatka from a shaft of the engine of the fan of a radiator.
5. If the engine of the fan of a radiator is faulty, it is necessary to replace it as repair of the engine is not provided.


1. Installation is made in sequence, return to removal. Thus check, that the lower part of a casing of the fan was correctly established on a radiator.
2. In summary start the engine, warm up it to normal working temperature and check that the fan of a radiator works.