Opel Vectra A

since 1988-1995 of release

Repair and car operation

Vektr A. Opel
+ 1. Maintenance instruction
+ 1.1 Maintenance
+ 2. Engine
+ 3. Repair of DOHC engines
+ 4. Repair of the diesel engine
+ 5. Cooling system
- 6. Fuel system
   6.2. General information
   6.3. Air filter
   6.4. The block of adjustment of temperature of air arriving in the engine
   6.5. Check of the fuel pump
   6.6. Removal and installation of the fuel pump
   6.7. Fuel tank
   6.8. Fuel level sensor
   6.9. Separator паров fuels (l model 1,6 and 1,8)
   6.10. Accelerator pedal
   6.11. Accelerator cable
   6.12. Carburetor
   6.13. Removal and carburetor installation
   6.14. Adjustment of turns of idling and the contents WITH
   6.15. Needle and float
   6.16. Vacuum diaphragm of a butterfly valve of the secondary chamber
   6.17. Diaphragm of an ekonomayzer
   6.18. Accelerating pump
   6.19. Knot of an air automatic zaslonka
   - 6.20. Vacuum blocks of moving of an air automatic zaslonka
      6.20.2. Vacuum moving
      6.20.3. Solenoid of secondary moving
   6.21. Carburetor filter
   6.22. Adjustment of the shock-absorber of a butterfly valve
   6.23. Sensor of provision of a butterfly valve (an automatic transmission)
   6.24. Check of the valve of increase in turns of idling
   6.25. The electromagnetic valve of idling on models of 1,8 l
   6.26. Inlet collector
+ 7. A fuel and exhaust system of models with system of injection of fuel
+ 8. Exhaust system and system of fall of toxicity of exhaust gases
+ 9. Fuel systems of the diesel engine
+ 10. Engine electrosystems
+ 11. Transmission
+ 12. Mechanical transmission
+ 13. Automatic transmission
+ 14. Power shafts
+ 15. Brake system
+ 16. Suspension bracket
+ 17. Body
+ 18. Electric equipment
+ 19. Check of malfunctions


6.20.3. Solenoid of secondary moving


Arrangement of the screw of fastening of the solenoid of secondary moving and grounding tire

1. The solenoid of secondary moving works together with the main block of a diaphragm.
2. Remove a weight wire from the accumulator.
3. On early models remove the air filter. On later models disconnect an air pipe from the air filter, then disconnect a vacuum pipe and a hose of ventilation of a case from the air chamber. Unscrew three screws and remove the air chamber together with an air line.
4. Disconnect a vacuum tube from the diaphragm block.
5. Disconnect the electric socket, unscrew the screw of fastening and remove the solenoid and an arm from the carburetor. Keep in mind that the screw of fastening of the solenoid also fixes the grounding tire электричес whom the socket (see drawing).


1. Installation is made in sequence, return to removal. At screwing up of the solenoid do not forget to screw also the grounding tire.